Giovanni Dondi dall Orologio
University of Bologna, Italy
Biography
Giovanni Dondi dall Orologio, upon completion of his doctorate in Medicine at the University of Bologna in 1969, he achieved the post graduated title of specialist in dentistry. He was Assistant Professor in 1973 and Associate Professor in 1983. Head of the Division of Conservative Dentistry from 1973. Director of the Master in Clinical Dentistry with advanced technology from 2003.During the last fifteen years he worked to improve the methodology of clinical trials in dentistry according with the evidence rules with special focus about composites.Lecturer in many different countries, from China and Japan to USA and Canada, he published more than 75 articles in international journals.
Hamdan Haji Ya (H.H. Ya)
Universiti Teknologi PETRONAS, Malaysia
Biography
Hamdan Haji Ya (H.H. Ya) is now as Associate Professor at the Mechanical Engineering Department, UniversitiTeknologiPETRONAS, since December 2013. Prior to that, He has more than twenty years of working experience in the industrial sector where his last position was the General Manager at SIRIM Berhad, Malaysia. He earned a PhD in Impact Engineering @ Applied Mechanics, Mechanical Engineering at The University of Manchester in 2006. He has written more than40 technical papers including five paper journals (Q1 and Q2), two book chapters and one file patent. Ir. Dr. Hamdan is a professional engineer with the practicing certificate, a cooperate member of the Institute of Engineers Malaysia (MIEM) and member of Charted Engineer, IMechE. His research interest is in the impact engineering on composite materials, composite pressure vessel, multiphase flow pipe erosion and energy.
Ahmad Zuhairi Abdullah
Universiti Sains Malaysia, Malaysia
Biography
Prof Dr Ahmad Zuhairi Abdullah received his PhD in 2004 in chemical engineering. His research works involved the use of functionalized nanoporous materials in oleo chemical conversions, waste treatment and renewable energy sources. He used to be involved the environmental impact assessment of oil refinery, petrochemical complex, sanitary landfill, smelting plant, used acid lead battery, paper mill etc. Many international invitations have been received to share his research experience. He has published more than 200 refereed articles in journals. He is one of the recipients of the Top Research Scientist Malaysia 2014 award.
Omid Akbarzadeh
University of Malaya, Malaysia
Biography
Dr. Omid Akbarzadeh is working with Nanotechnology and Catalysis Research Centresince2016,His main research area isheterogeneous and homogenous catalysis, catalytic reaction engineering. He has spent 10 years in academic-industrial projects as a research assistantand post-doctoral and worked5 years in the oil and gas industry in Iran as a chemical engineer. He developed advance smartcatalystsespecially foroil and gasindustries. Dr. Omid has contributed to two PETRONAS Research SdnBhdindustrialcatalyst projects and worked on international Airbus R&D; project in NANOCAT.Currently,he is the PI ofgraphene catalyst project in Hokkaido University Japan, project member of two FRGS grant in UTPand assigned to the NANOCAT center project.He has published more than 18 papers, four book chaptersand have two approved and granted patents. Also, he has hands-on experience and passed several pieces of training on handling different types of equipment which are being widely used for material synthesis, characterization and performance evaluation. He is in close collaboration with other departments, government agenciesand other universities around the world.He is visiting researcher of Jiangsu universityChina and Hokkaido UniversityJapan. He is a member of the society of petroleum engineers (SPE), Senior Member of Hong Kong Chemical, Biological& Environmental Engineering Society.He awarded full fellowship from UTP during Ph.D and were involved for teaching in the different courses of chemical engineering.He awarded Silver Medal in 27th International Invention & Innovation Exhibition (ITEX 2016), Kuala Lumpur Convention Center in Malaysia andSilver Medal of Post Graduate Research Project in 35th Science & Engineering Design Exhibition (SEDEX 35).
Lai Chin Wei
University of Malaya, Malaysia
Biography
IR. DR. LAI CHIN WEI is a senior lecturer in the Nanotechnology & Catalysis Research Centre, University of Malaya. He received his Ph.D (2013) from School of Materials and Mineral Resources Engineering, University of Science Malaysia in nanomaterials and nanoscience. Lais main research interests are in the areas of chemically modified metal oxide photocatalysts and carbon graphene materials, especially apply in environmental pollution management and solar energy technology. Lai has contributed immensely to the development and enhancement in science & technology in Malaysia, particularly in developing, optimizing and simplifying the technology lies in the synthesis of nanoparticles, metal oxide nano-architecture and carbon/graphene materials which are of high significance for green energy and environment applications. Lais works have been published in more than 130 refereed international top-tier journals with h-index of 21, 15 book chapters, and 120 international proceedings in materials science, physics, chemistry, and renewable energy researches. In all, Lai has reviewed more than 200 papers in the past few years, mainly for top international journals and conferences. Since 2013, his research has been funded by the Ministry of Higher Education of Malaysia, MOHE (FRGS, HIR-MOHE); Ministry of Science, Technology and Innovation of Malaysia, MOSTI (E-Science fund, National Nanotechnology Development), and internal University funding (University of Malaya Research Grant). Being a reputable researcher, his enthusiasm and dedication towards research work, Lai has won several prestigious university, national and international awards in exposition on research innovation, invention & solution. In addition, he successfully awarded Certificate of Excellent Service UM for his excellent contribution and service in the year of 2013, 2014 and 2015. Through his work nanomaterials and catalysis field, Lai was awarded the University of Malaya Excellence Awards in the category of outstanding researcher- UM Young Researcher (Sciences Discipline) and selected to be a member of the Young Scientist Network Academy of Sciences Malaysia (YSN-ASM) in 2015. Lately, Lai was awarded as Finalists National Young Scientist Award 2018 by Ministry of Science, Technology and Innovation of Malaysia and won Mass Young Researcher Award 2018 by Malaysian Solid State Science & Technology Society, Malaysia. On professional qualifications, Lai registered as a Professional Engineer (PEng) in Material Engineering discipline with the Board of Engineers, Malaysia (BEM) and registered as a Chartered Engineer (CEng) with the Engineering Council, UK in 2017. Lai is an active member in The Institution of Engineers, Malaysia (IEM, MAL), Energy Institute (EI, UK) and Institution of Mechanical Engineers (IMechE, UK). He is recognised as among the calibre and outstanding young scientists in the country who have the potential of advancing the scientific ecosystem in Malaysia.
Osman Adiguzel
Ankara University, Turkey
Biography
Dr. Osman Adiguzel graduated from Department of Physics, Ankara University, Turkey in 1974 and received PhD- degree from Dicle University, Diyarbakir-Turkey. He studied at Surrey University, Guildford, UK, as a post doctoral research scientist in 1986-1987, and his studies focused on shape memory alloys. He worked as research assistant, 1975-80, at Dicle University and shifted to Firat University in 1980. He became professor in 1996, and he has already been working as professor. He published over 50 papers in international and national journals; He joined over 100 conferences and symposia in international and national level as participant, invited speaker or keynote speaker with contributions. He served the program chair or conference chair/co-chair in some of these activities. In particular, he joined in last four years (2014 - 2018) over 50 conferences as Speaker, Keynote Speaker and Conference Co-Chair organized by South Asian Institute of Science and Engineering (SAISE), web: http://saise.org/, Science and Engineering Institute (SCIEI), web: http://www.sciei.org, International Association of Computer Science and Information Technology, web: http://www.iacsit.org/, The Academic World Education and Research Center (AWER-Center), web: http://www.awer-center.org/, and other institutes and companies. Dr. Adiguzel served his directorate of Graduate School of Natural and Applied Sciences, Firat University in 1999-2004. He supervised 5 PhD- theses and 3 M.Sc theses. He is also Technical committee member of many conferences. He received a certificate which is being awarded to him and his experimental group in recognition of significant contribution of 2 patterns to the Powder Diffraction File – Release 2000. The ICDD (International Centre for Diffraction Data) also appreciates cooperation of his group and interest in Powder Diffraction File. Scientific fields of Dr. Adiguzel are as follow: Shape memory effect and displacive phase transformations in shape memory alloys and other alloys, molecular dynamics simulations, alloy modeling, electron microscopy, electron diffraction, x-ray diffraction and crystallography.
Ahmed H. A. Dabwan
TATi University College, Malaysia
Biography
Dr.Ahmed obtained his Bachelor degree in Chemical Engineering from King Saud University, Riyadh, Saudi Arabia, his Master (2001), and Ph. D. (2004) from Graduate School of Engineering, Mie University, Japan. Dr. Ahmed was appointed as a full time research in Mie Industry and Enterprise Support Center (MIESC), Japan from (4/2005 – 6/2007). Full time researcher in Anotsu Research Institute for Environmental Restoration (ARIER), Mie, Japan from 7/2007- 4/2009). From 5/2009 joined TATI University College, Terengganu, Malaysia as a Senior Lecturer, became the Dean of Chemical Engineering Technology at the same university from 8/2012 to 2/2013.
Vaidotas Kazukauskas
Vilnius University, Lithuania
Biography
Dr. Habil. Vaidotas Kazukauskas is a Professor at the Faculty of Physics of Vilnius University, Lithuania. He was awarded Dr. Habil. degree in 1999. The topics of his research work are carrier transport, generation, recombination and trapping phenomena in advanced materials and structures for (opto-)electronic and photovoltaic applications. Prof. V. Kazukauskas is/was involved as a team leader into the six large-scale international projects and other numerous projects. He was awarded the National Science Award of Lithuanian Republic, the National Science Award for the Distinguished Scientist, the Science Award of the Rector of Vilnius University and others. V. Kazukauskas has more than 380 publications, had delivered more than 60 invited lectures at the international conferences, and authored three textbooks.
Dieter H. Bimberg
Chinese Academy of Sciences, TU Berlin
Biography
Dieter H. Bimberg is Executive Director of the Bimberg Center for Green Photonics of the Chinese Academy of Sciences at CIOMP, Changchun and is the Founding Director of the Center of Nanophotonics at TU Berlin. He was chairman of the Department of Solid State Physics at TUB from 1991 to 2012 and was holding the chair of Applied Physics until 2015. His research interests include the growth and physics of nanostructures and nanophotonic devices, ultrahigh speed and energy efficient photonic devices for information systems, single/entangled photon emitters for quantum cryptography and ultimate nanoflash memories based on quantum dots. He has authored more than 1500 papers, 61 patents/applications, and 7 books resulting in more than 59,000 citations worldwide and a Hirsch factor of 109 (@ google scholar). His honors include the Russian State Prize in Science and Technology 2001, his election to the German Academy of Sciences Leopoldina in 2004, to the Russian Academy of Sciences in 2011, to the American Academy of Engineering in 2014, to the American Academy of Inventors 2016, He was elected as Fellow of the American Physical Society and IEEE in 2004 and 2010, respectively. He received the Max-Born-Award and Medal 2006, awarded jointly by IoP and DPG, the William Streifer Award of the Photonics Society of IEEE in 2010, the UNESCO Nanoscience Award and Medal 2012, Heinrich-Welker-Award 2015 and Nick Holonyak jr.Award of OSA in 2018.In 2019 he received the IEEE Nishizaza Award and Medal. The University of Lancaster (UK) and the St. Petersburg Scientific University of the Russian Academy of Sciences bestowed honorary doctorates to him.
Prasad KDV Yarlagadda
Queensland University, Australia
Biography
Prof. Prasad KDV Yarlagadda worked in industry and university over 30 years. He is distinguished graduate of IIT, Bombay brought considerable Bio manufacturing skills to Australia based on his prior experience in India, Hong Kong, Paua New Guinea and Singapore. He is currently Professor in Smart Systems and Project Director: Airports of the Future, in Queensland University of Technology, Australia. He is also a key researcher in Industry training and transformation centre for Bio Additive Manufacturing. Prof. Yarlagadda had number of distinguished appointments in various universities in India, China and Australia. He received more than $16M funding for his research and he published 500 papers. In 2012 he received a Prestigious Great Honour Award for his outstanding and life time contribution to the discipline of manufacturing in world Arena from Materials Division of Polish Academy of Sciences. In 2016 Professor Yarlagadda was awarded Order of Australia Medal and included in Queens Birthday Honours list in recognition of his outstanding service to Engineering Profession and Indian Community in Queensland, Australia. He is Editor in Chief and Deputy Editor-in-chief of 4 international journals, and also editorial board member of 18 ISI listed Journals. He is fellow of many professional organisations of Indian communities of Queensland, President The India Australia society and others.
Tamer A Sebaey
Prince Sultan University, KSA
Biography
Dr. Tamer Sebaey is a PhD holder with research interest focuses on the mechanics and manufacturing of fiber-reinforced plastic composites (FRP). Numerical simulations, experimental characterization, microscopic analysis, optimization, and manufacturing are all tools used by Dr. Sebaey in his research. Dr. Sebaey’s PhD was obtained from the University of Girona in Spain, 2013. His experience records include working full time at Zagazig University (Egypt), Qatar University (Qatar), University of Limerick (Ireland) and University of Girona (Spain). Recently, Dr. Sebaey joined Prince Sultan University in KSA as an associate professor of mechanical engineering. Current scientific records of Dr. Sebaey include more than 50 scientific papers with 15 h-index and 18 i10-index.
Sirikanjana Thongmee
Kasetsart University, Thailand
Biography
Dr. Sirikanjana Thongmee now is an Assistant professor of Physics, she was in Physics Department Faculty of Science, Kasetsart University. She got her B.Sc in Physics at Prince of Songkla University, M. Sc. in Chemical Physics at Mahidol University and Ph.D. (Materials Science) at National University of Singapore. Dr. Sirikanjana Thongmee got the Thesis Presentation Award, Mahidol University, Thailand, 1999 and Outstanding Research of the Year 2nd Class Award, Office of the National Research Council of Thailand, Thailand, 2003. Currently Dr. Sirikanjana Thongmee’s researches focus on the metal doped ZnO for spintronics and gas sensors applications, magnetic nanomaterials, Metal oxide decorated graphene oxide for Photocatalytic, sensing and 3D printing. Moreover, Dr. Sirikanjana Thongmee is also doing research on activated carbon from agricultural wasted for adsorbing the heavy metals, different type of poison gases and waste water.
Zouheir Bitar
Beirut Arab University, Lebanon
Biography
Dr.Zouheir Bitar is researcher in Materials Science and Nanomaterials. Currently, he is working on researches related to nanomaterials in the materials laboratory of Beirut Arab University, Lebanon. He got his B.S. in physics, M.S. in physics (materials science) and Ph.D. in physics (nanomaterials) from Beirut Arab University. He has many articles published in international journals. He got the award of best scientific poster in FTAPS. In addition to his research work, he works as education consultant. He believes in team work. Furthermore, he is doing research on nano ferrites and nanocomposites for biomedicine applications. Also, he is interested on researches that improve the high frequency devices.
Bratin Ghosh
Indian Institute of Technology, India
Biography
Prof. Bratin Ghosh completed his PhD in Applied Electromagnetics from the University of Manitoba, Winnipeg, Manitoba, Canadaand postdoctoral studies from the Royal Military College, Kingston, Ontario, Canada. He is currently Professor at the Department of Electronics & Electrical Communication Engineering, Indian Institute of Technology, Kharagpur, India. He is an invited an keynote speaker and the Chair of many national and international conferences and seminars. He has published more than 25 papers in reputed journals and has been serving as an editorial board member of a number of international journals of repute.
Karol Kyziol
AGH University, Poland
Biography
Karol Kyziol established numerous cooperation with industry, transferring acquired knowledge into the realization of technological solutions in companies, including Innowacja Polska sp. z o.o. and EC Grupa sp. z o.o. Study on influence of technological parameters on physicochemical and biological properties of modified surfaces, design of technology for improving mechanical, tribological and corrosion resistance of light-weight materials (incl. aluminum and magnesium alloys), surface functionalization of biomaterials, etc. I have cooperated with many academic centers including the Faculty of Chemistry Jagiellonian University (the team of Prof. Ph.D. Grażyna Stochel), Institute of Materials Science and Engineering Lodz University of Technology (the team of Ph.D Eng. Åukasz Kaczmarek, Prof. PÅ), Technical University of Kosice (Slovakia) and University of Zaragoza (Spain), as well as companies that operate in the field of surface material engineering.
Abdeen Mustafa Omer
Energy Research Institute, United Kingdom
Biography
Dr. Abdeen Mustafa Omer (BSc, MSc, PhD) is an Associate Researcher at Energy Research Institute (ERI). He obtained both his PhD degree in the Built Environment and Master of Philosophy degree in Renewable Energy Technologies from the University of Nottingham. He is qualified Mechanical Engineer with a proven track record within the water industry and renewable energy technologies. He has been graduated from University of El Menoufia, Egypt, BSc in Mechanical Engineering. His previous experience involved being a member of the research team at the National Council for Research/Energy Research Institute in Sudan and working director of research and development for National Water Equipment Manufacturing Co. Ltd., Sudan. He has been listed in the book WHO’S WHO in the World 2005, 2006, 2007 and 2010. He has published over 300 papers in peer-reviewed journals, 200 review articles, 17 books and 150 chapters in books.
Luisa Maria Arvide Cambra
University of Almeria, Spain
Biography
Professor Dr. Luisa Maria Arvide Cambra, Spanish is now Professor with Chair at the University of AlmerÃa (Spain) and she was Assistant Professor and Associate Professor at the University of Granada from 1979 on. Forty nine years of the teaching and researching experience. She is the Director of Research Group HUM113-Estudios Filológicos from Program of Research of Andalusian Government, where she has managed and directed several academic and scientific contracts and research projects, as well as a Member of European Scientific Institute (ESI) Team, Athens Institute for Education & Research (ATINER) in Greece, The Academic Genesis Platform (UAGP) in UK&Turkey; and Experts of Academic Excellence Research Centre (EAERC) in Jordan; GI Social Sciences Forum (GISSF), in Malaysia; Akademica Nusa International Association of Social Sciences and Humanities, in UAE; Science Research Association (SCIREA); Academic Fora; Foundation for Social Sciences and Education Research (FSSER); etc. She is author of a many works on several aspects of the Arabic science and literature in the Middle Ages, as well as Arabic language and linguistics. She has also participated in different prestigious international scientific Conferences. She has visited a many universities and academic institutions of Europe, United States and Arab countries in order to teach and research. Among her works, we have the study and the translation to Spanish of some treatises of Kitab al-tasrif´s Al-Zahrawi, Ibn Qutayba´s texts, Maqamas of Al-Hariri, The Sicilian Questions of Ibn Sab´in, and the book on the plague by Ibn Khatima.
Hedayat Omidvar
National Iranian Gas Company, Iran
Biography
Hedayat Omidvar Graduated in Industrial Engineering (MSc) in 2002.He has been working since 1992 as Natural Gas consumption expert in Corporate Planning Dept., National Iranian Gas Company (NIGC), responsible for treatment, transmission, storage and distribution of natural gas. At present, he is Head of Communication Affairs with Science & Research Centers,Research & Technology Dept. Member of Institute of Industrial Engineers (IIE) since 1992.Member of American Industrial Hygiene Association (AIHA) since 1994.Member of Iran Institute of Industrial Engineering (IIIE) since 2001.Member of Programme Committee A (PGC A) “Sustainable Development†of the International Gas Union (IGU) 2003-2006.Member of Marketing and Communication Committee (PGC E) of the International Gas Union (IGU) 2006-2012.Member of Gas Advocacy Task Force (TF2) of the International Gas Union (IGU) 2012-2015.Secretary of Utilization Committee of the International Gas Union (IGU) 2015-2018.Member of Marketing and Communication committee of the International Gas Union (IGU) 2015-2018.Member of Executive Committee of the International Gas Union (IGU) 2015-2018.Chair of Energy Policy Task Force (TF3) of the International Gas Union (IGU) 2018-2021.Member of Group of Experts on Gas of United Nations Economic Commission for Europe (UNECE) from 2016.Letter of Commendation As the Exemplary Research Expert Received From the Deputy Petroleum Minister & Managing Director of NIGC 2008.Letter of Commendation Received From the Deputy Petroleum Minister & Managing Director of NIGC 2011.Letter of Commendation Received From the Deputy Petroleum Minister & Managing Director of NIGC 2013.Diploma in recognition of the services rendered to the International Gas Union as Secretary of Utilisation Committee 2015-2018.Diploma in recognition of the services rendered to the International Gas Union as Member of Executive Committee 2015-2018.
Ke-Lin Du
Concordia University, Canada
Biography
K.-L. Du received the PhD in electrical engineering from Huazhong University of Science and Technology, China, in 1998. He founded Xonlink Inc., Ningbo, China in 2014. He was Chief Scientist at Enjoyor Inc., Hangzhou, China from 2012 to 2014. He was on research staff at Department of Electrical and Computer Engineering, Concordia University, Montreal, Canada from 2001 to 2010. Prior to 2001, he was on technical staff with Huawei Technologies, China Academy of Telecommunication Technology, and Chinese University of Hong Kong. He visited Hong Kong University of Science and Technology in 2008. Dr. Du has authored four books (Neural Networks in a Softcomputing Framework, Springer, London, 2006; Wireless Communication Systems, Cambridge University Press, New York, 2010; Neural Networks and Statistical Learning, Springer, London, 2014; Search and Optimization by Metaheuristics, Springer, 2016). He has also published over 50 papers, and has 4 issued U.S. patents and 30 Chinese patents. Currently, his research interests are signal processing, wireless communications, and machine learning. In the past five years, he has co-supervised 11 MSc students. Dr. Du has become a Senior Member of the IEEE since 2009. He is currently an Affiliate Associate Professor at Concordia University. He has been on Editorial Board or been Associate Editor of 10 journals, including IET Signal Processing and Circuits, Systems & Signal Processing. He also serves on the editorial board of the Chinese edition of IEEE Spectrum. He served as member of technical / program / organizing committees of 86 international conferences. He has reviewed papers for 102 international journals, and numerous conferences, grants, theses, and qualifications. He was included in Marquis Who's Who in 2018.
Omrane Benjeddou
University of Tunis El Manar, Tunisia
Biography
I am Professor Omrane Benjeddou, Tunisian nationality, and currently an associate professor of civil engineering at the Tunisian University. I have several published scientific articles in an international journals. I have also written two books in the field of civil engineering, published in an international publishing houses. I have also a certificate of competence in concrete control from the American Cncrete Institute "ACI". I am also a member of scientific committees for several scientific journals.
Behzad Pourabbas
Sahand University of Technology, Iran
Biography
Behzad Pourabas is a Professor of Polymer Engineering Dept., in the Sahand University of Technology (since, 2009). He worked as an Associate Professor for Polymer Engineering Dept., in the Sahand University of Technology, Tabriz-Iran (2005- 2009), and he was Visiting Professor for Department of Materials and Environmental Engineering theUniversity of Modena and Reggio Emilia, Italy, (2007-2008). Behzad Pouradas was an Assistant Professor for the Faculty of Chemical Engineering, Dept. of Polymer Engineering, Sahand University of Technology, Tabriz-Iran (1996-2005). Behzad Pouradas was a Head of Nanostructured Materials Research Center (NMRC), Sahand University of Technology, Iran (2004-2007), and he was a Head of Research Organization Office, Sahand University of Technology, Tabriz-Iran (1997-2001), he was a Chairman of the Nanotechnology Committee, Province of E-Azerbaijan, Tabriz-Iran (2004-2006).
Alain Dufresne
Grenoble Institute of Technology, France
Biography
Alain Dufresne is currently Professor of The International School of Paper, Print Media and Biomaterials (Pagora) at Grenoble Institute of Technology, Grenoble, France. Professor Dufresne obtained a PhD in Electronics from the National Institute of Applied Sciences at Toulouse, France and he has already Masters in Chemical Engineering from Ecole Polytechnique de Montréal and in Solid State Physics from Paul Sabatier Univesity, Toulouse. Dufresne is an expert on polysaccharide nanofibrils and nanocrystals (cellulose, chitin, starch), on processing and characterization of nanocomposites based on renewable resources and on valorization of the biomass. He is, at the same time, member of the Editorial Board of “Carbohydrate Polymersâ€, "Packaging Research", "Fibers", "Materials Research Ibero-American Journal of Materials", "The Open Macromolecules Journal", "The Open Natural Products Journal", "The Open Colloid Science Journal", "The Open Polymer Science Journal", "Journal of the Korean Wood Science and Technology" and "Polimeros: Ciencia e Tecnologia". Alain Dufresne was Associate Professor of Physical and Metallurgy & Materials Physics Lab. at National Institute of Applied Sciences, Lyon, and professor in the Research Center on Vegetable Macromolecules (CERMAV) at Joseph Fourier University, Grenoble. He was, for one year, visiting professor at Program of Metallurgical Engineering and Materials (PEMM) of COPPE/UFRJ, Rio de Janeiro, and visiting professor for one month at Polymer Research Centre (PORCE) at Universiti Kebangsaan, Malaysia. From 2014 to 2016, Alain Dufresne was at Fortaleza, Brazil, working in the Brazilian Agricultural Research Corporation (EMBRAPA).
Hussein Shokrvash
University of Maragheh, Iran
Biography
Hussein Shokrvash studied experimental /theoretical materials science at Iran University of Science and Technology (1993) and Tarbiat Modares University (1999) with the supervision of Prof. Hamid Assadi (now in Brunel University, UK). In 2000 he was appointed researcher assistant and worked on the field of glassy materials, ferroic and functional materials in the section Advanced Materials Department. He was the advisor for the Ministry of Industries and Mines, member of materials programme committee and advisor for various companies. He obtained a PhD in Nanomaterials science at the Materials and Energy research center (MERC) (2009) for his work on new approach for synthesis of metal-matrix nanocomposites. His research interests focus on the design and synthesis of metal matrix nanocomposites and nanoalloying of immisicible metals using nano scale precursors and their applications in energy, functional materials and novel superconducting.During his PhD research he was employed at university of Maragheh. He has published papers in peer-reviewed journals relating to the science and technology of ferroic materials, metal-matrix nanocomposites and nano-crystals. He is a referee of reputable and high impact factor journals: Nanotechnology, Journal of Physics D: Applied Physics and Materials Research Express and national academic journals. In 2018 he founded Research Center for Nanotechnology and Nano-device for undertaking interdisciplinary research under the theme of nanomaterials and electronics for energy conversion, nano-transducers, coupling systems, and nano-devices.
Yousef Tamsilian
Chamran University of Ahvaz, Iran
Biography
Yousef TAMSILIANis anAssistant Professor at Petroleum, Gas & Petrochemical Engineering (PGP) Department, Chamran University of Ahvaz (SCU) where is one of the comprehensive universities in Iran. Meanwhile, He leads a knowledge-based enterprise on high technological materials production including smart nanomaterial, superabsorber, heat transfer nanofluids, etc. He has got Ph.D. in Chemical Engineering from Sharif University of Technology, having some technical coursesat POLYMAT of University of the Basque, BASF Co., and Texas Tech University. His M.Sc. and Ph.D. theses were about modeling and experimental study of rheological behavior of smart polymeric core-shell nanostructure fluids during the chemical EOR process. Over ten years of professional academic and industrial experiences in the universities and oil & gas industries,he has run more than 30 projects including one national Iranian project, published more than 35 papers in international and national journals and conferences and five books subjected to OpenFOAMCFD, thermodynamic, nanomaterial, and molecular dynamic. He also has two US. Patents and two Iranian Patents having EOR principles to proceed the edge of knowledge for chemical phased-behavior. Considering hisexcited background in smart nanostructured materials, chemical enhanced oil recovery, polymerization engineering, modeling of polymer and chemical processes, his current research interests have evolved into two principal themes: 1. Technology Commercialization: Smart chemicals for CEOR;O&G; superhydrophobic absorber 2. Project Development: Feasibility study & basic design of flare/furnace gas recovery, wastewater treatment, chemical production.
Rosa Lelyana
Diponegoro University, Indonesia
Biography
Rosa Lelyana completed medical school in 1997 and graduated S2 is less than 2 years of research in the field of coffee. She is a member of the ACS (American Chemical Society) on request since 2014. In 2011 she received an award from the Dean of the Faculty of Medicine and University lecturer Diponegoro as one of the best level textbook authors of university medical faculty level Diponegoro. Education History : 1.General Medicine 2.Professional Education of General Practitioners 3.Master Programme 4.Doctoral Programme Employment History : Since 1997 :General Practitioner 1998-2001 :Doctor Temporary Employees in Community Health Centers in Ungaran,Central Java, Indonesia. Since 2006 :Researcher, author/writer and lecturer in Diponegoro University 2006-2010 :Speaker for national radio broadcasts (Radio Republik Indonesia) about many topics of healthy life style and nutrition theme.
Ramachandra C G
Presidency University, India
Biography
Dr. Ramachandra C G working as Associate Professor for School of Engineering (Department of Mechanical Engineering), Presidency University, Bengaluru. He has obtained his B.E in Mechanical Engineering from Mysore University, M-Tech in Maintenance Engineering from Visvesvaraya Technological University & Ph.D in Mechanical Engineering Science from Visvesvaraya Technological University. He has 19 years of experience in Academics, Administration & Research. He has worked in Srinivas Institute of Technology, Mangaluru for 11 years as Assistant Professor, Associate Professor, Professor & Head, Dept. of Mechanical/Marine Engineering. He has also worked in Coorg Institute of Technology, Ponnampet as Head, Dept. of Mechanical Engineering, GSSS Institute of Engineering & Technology for Women, Mysuru as Lecturer, RPV Consultants, Mysuru as Assistant Engineer. He is a life member of several professional bodies like Indian Society of Technical Education, Institution of Engineers (India), Seventh Sense Research Group Journals, International Association of Engineers, Systems Society of India, Indian Society of Systems for Science & Engineers, International Institute of Engineers & Researchers, International Consortium of Scientists & Researchers Society for Mechanical, Manufacturing & Production Engineering, Indian Society of Mechanical Engineers, Society of Engineers & Technicians (Malaysia), Society of Professional Engineers, Institute for Exploring Advances in Engineering, Innovative Scientific Research Professional Malaysia, The Society of Innovative Educationalist & Scientific Research Professional. His research areas are Condition Monitoring, Total Productive Maintenance, Maintenance Management, Preventive Maintenance, Lean Manufacturing, Vertical Wind Turbines etc. He has published 84 papers in international/national journals & presented 82 papers in international/national conferences. He is an Editorial Board Member of 82 international journals and Reviewer Board Member of 29 international journals. He has guided many U.G and P.G projects, currently he is guiding 6 research scholars. He has received few academic excellence awards from the national/international bodies. He is a Member-Panel of Examiner for Visvesvaraya Technological University, Anna University, JSS Science & Technological University, Shivaji University, Nitte University etc.,
Zakaria Boumerzoug
University of Biskra, Algeria
Biography
Zakaria Boumerzoug is a professor of metallic materials at Biskra University. He joined Biskra University in 1992. He has completed his PhD from Constantine University in 1998. He published more than fifty articles and he participated to more than thirty international conferences as speaker and invited speaker (ICWET’16 Turkey, 3rd WCSE2017 Spain, ICMTMTE2018 Russia,.HORA2019 Turkey . He was as a member and also as a guest editor in some international conferences. He has supervised 18 PhD students. He has reviewed many articles of some scientific journals. He is a chief of an international project between Biskra University and UMONS University in Belgium. He has a short international teaching experience at Cadiz University, Spain. He has organised more than 10 scientific meeting in Algeria. He is the academic editor of the journal Advances in Research from 01/09/2018 to 31/08/2022. He edited a book of Advanced Materials Design and Mechanics.
Ricardo Branco
University of Coimbra, Portugal
Biography
Ricardo Branco has completed his PhD degree in Mechanical Engineering from the University of Coimbra. He is currently Professor at the Department of Mechanical Engineering of the University of Coimbra, Portugal. Research Interest in Structural integrity, mechanical behaviour of materials, fatigue and fracture of engineering materials, fatigue analysis of mechanical and structural notched components, application of finite element method to fracture mechanics.
Majid Ghassemi
K.N.Toosi University of Technology, Iran
Biography
Majid Ghassemi is a Professor of Mechanical Engineering Department at the K. N. Toosi University of Technology in Tehran, Iran. He has over 20 years of academic and industrial experience and served as the President of the K. N. Toosi University of Technology from 2010 through 2013. Professor Ghassemi has also served in several public and private boards and panels and supervised several undergraduate, masters and PhD students, published several books and many journal and conference papers. He is currently Editor-in-Chief and Editorial Board member for many international journals. He also serves as member in several international conferences. Professor Ghassemi received his Ph.D. in Mechanical Engineering from Iowa State University in 1993.
Sunirmal Jana
Ceramic Research Institute, India
Biography
Dr. Sunirmal Jana born on 12th July, 1966. He did his Master of Science degree in Chemistry in the year 1991 from Kalyani University, India and obtained his Ph.D. (Science) degree in 1998 from Jadavpur University, Kolkata, India. He also completed Bachelor of Education degree (B. Ed.) and “Council of Scientific and Industrial Research (CSIR) organized “Leadership Development Programme (LDP 0905)†management course for middle to senior level leaders†at CSIR HRDC, Gaziabad, India. In December 1997, Dr. Jana joined CSIR-Central Glass and Ceramic Research Institute (CSIR-CGCRI), Kolkata, India as a Junior Scientist. Presently, he is working as a Senior Principal Scientist of CSIR under Ministry of Science & Technology, Government of India and Professor of the Academy of Scientific & Innovative Research (AcSIR) at the same Institute (CSIR-CGCRI). Dr. Jana is also performing his duties as a course co-ordinator and as an Associate Professor for the course, “Structural and functional coatings†of AcSIR. He is also working as Guest Teacher for B. Tech. students in Chemical Technology of University of Calcutta, Kolkata, West Bengal, India on “Sol-gel materials, carbon nanotubes, sonochemical synthesis†from the year 2016. Dr Jana is actively involved / coordinated / performed / performing as Principal Investigator (PI) / Co-PI of various national and international research projects. At present, he has published about 65 SCI/peer reviewed research papers (h-index: 15; i10-Index: 31, RG Score: 31.77, Citations: ~850) in internationally reputed different journals, above 70 conference papers, 5 Book Chapters and 3 Indian patents. He already guided 4 Ph.D. (Science/Engineering) students and also guiding several Ph.D. students. In addition, he already supervised 15 M.Tech/M.Sc/B.Tech. students for the projects to fulfill their respective degrees. Dr. Jana is an elected member of the Council of Indian Ceramic Society for the three successive terms (years 2015 and 2016; 2017 and 2018; 2019 and 2020) and he is working as one of the EC members of Materials Research Society of India (MRSI), Kolkata Chapter, India. He is also the life members of Materials Research Society of India, Indian Ceramic Society, Indian Association for the Cultivation of Science and NCE Bengal & Jadavpur University, Kolkata, India. Dr Jana is one of the senior members of International Engineering and Technology Institute (IETI), Hong Kong. Dr. Jana availed Brain Pool Fellowship from Korean Federation of Science & Technology Societies (KOFST) and worked as a visiting scientist at Korea Research Institute of Chemical Technology (KRICT), Daejeon, South Korea for one year during 2005-2006. He also did his research work as visiting scientists in other prestigious research Institutes in abroad (Slovenia and Portugal). Presently, Dr. Jana is functioning as one of the Editorial Board Members/Editors including Advances in Nanoparticles (Scientific Research Publishing), General Chemistry (USA), Kenkyu Journal of Nanotechnology and Nanoscience (Kenkyu Group, India), Scholars Report under Nanoscience and Nanotechnology (USA), Journal of Advanced Nanomaterials (Isaac Publishing Co. Ltd., Hong Kong), Source Journal of Nanoscience and Nanotechnology (USA), Journal of Material Science and Nanoengineering (Neonex International Online Publishing Pvt. Ltd, India). He also delivered several invited talks in India and abroad and also chaired the technical sessions at various national and international conferences/seminars/symposia. Dr. Jana also evaluated/examined several PhD theses/PhD Viva voce Examinations as an external examiner of many Indian Universities (e.g. Karunya University, Sastra University, Manonmaniam Sundaranar Univerisity, Alagappa University, Periyar University, Indian Institute of Engineering Science and Technology, Shibpur; Formerly Bengal Engineering and Science University, Shibpur, West Bengal, India, Academy of Scientific & Innovative Research (AcSIR), India). He also reviewed research papers received from American Chemical Society (ACS), Royal Society of Chemistry (RSC), Elsevier, Spingers, Transactions of the Indian Ceramic Society, Bulletin of Materials Science, IOP, SCIRP and other journals. In addition to winning some poster paper awards, Dr. Jana won prestigious Distinguished Scientist Award of Venus International Research Awards (VIRA-2016) by Venus International Foundation, Chennai, India in the year 2016.
Sumit Kumar Gupta
Parishkar College of Global Excellence, India
Biography
Dr. Sumit Kumar Gupta Dean, Faculty of Science Parishkar College of Global of Excellence Jaipur in the Department of physics, With over 15 years of teaching, research, and administrative experience, he has held various administrative positions as the Head of Department in various degree colleges and engineering colleges and has a vast experience of teaching in IIT-JEE Institute.
Get in touch
Good choice...
Thanks!
I'll be in touch ASAP